Where is the Lenovo pinhole reset? (2023)

Where is the pinhole reset on my Lenovo laptop?

Laptops with an internal battery may have an emergency pin hole reset button on the bottom cover (see emergency-reset hole in the User Guide for more information). Use a straightened paper clip in the reset hole to reset the laptop. Some ideapads have a Novo button that can be used to get to the BIOS or recovery mode.

Novo button is a small circular button usually near the power button or on the left side of the laptop. The system will power on to display the Novo Button Menu. Use your arrow keys to select System Recovery and press Enter.

Press the Control, Alt, and Delete keys simultaneously. The screen will turn blue and a menu of options will appear. Select the Power button in the lower right. Select Restart.

Solution. Press the Windows key + Shift + Ctrl + B at the same time. This should bring the screen back.

If you have a Lenovo laptop with a built-in battery and it won't power on or wake-up from a sleep state, you can use the pin-hole emergency reset hole (button) to resolve the issue. Disconnect the power adapter and depress this button with a paper-clip or similar item.

Generally, a hard reboot is done manually by pressing the power button until it shuts down and pressing it again to reboot. Another unconventional method is by unplugging the computer from the power socket, plugging it back in again and pressing the power button on the computer to reboot it.

Unplug the AC, flip the device over, and use a paperclip to gently press the battery reset button through the hole on the back of the chromebook. Hold it down for a few seconds, then release it. This process turns the battery off. It won't turn on again until you've connected the AC power cord and the EC has booted.

Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.

For Lenovo All-in-ones, there is no NOVO button. To run Lenovo Onekey Rescue choose one of the options: Repeatedly press and release the F2 key after turning on the computer until entering Lenovo Rescue System, then select OneKey Recovery.

How do I do a factory reset?

Press the following keyboard combination: Windows key + Ctrl + Shift + B. Press all the keys at once and then release immediately. This refreshes your display connection and may get your display going again.

Laptop Screen is Black (But Still Powered On and Running!)

One of the main causes for this issue is a corrupt system file preventing the operating system from loading, resulting in a black or blank screen. Restart Windows to see if it's a temporary issue and resolves itself with a reboot. If the problem persists, erase your hard drive and reinstall Windows.

The process to reset the battery is to first unplug the AC adapter, press the reset button using a small pin or paperclip, and then plug the AC adapter back in. After resetting the battery and plugging the machine into power, the laptop should begin to power on and boot.

Click on Update & Security, then select Recovery to advance to the next step. Choose Restart Now under the Advanced Startup heading to bring up a menu with several options. Select Troubleshoot from the menu, and then click Reset this PC.

Unplug the power cord from the laptop. Use a paper clip and push into the Emergency reset hole, hold for 15 seconds and release it. Attempt to turn the laptop on again.

Restore your computer witn the F11 key. Over time your hard drive will become fragmented, slow down and become vulnerable to viruses. Rather than reformatting your drives and restoring all your programs individually, you can reset the entire computer back to its factory settings with the F11 key.

How do you do a pinhole reset?

Locate the small hole labelled “REBOOT EMTA” or “Reset” on the back of the DPT (see photos below) Using a pin, depress the button located at the base of this hole for 20 seconds. You will see the lights on the modem begin to flash as the system resets.

First things first, restart your laptop. When its booting up press the F key combination. This should bring up the system recovery console. Choose to do a full system wipe: this will wipe all the data from the hard drive you are using.

Press and hold the "Ctrl" and "Alt" keys on the keyboard, and then press the "Delete" key. If Windows is functioning properly, you'll see a dialog box with several options. If you don't see the dialog box after a few seconds, press "Ctrl-Alt-Delete" again to restart.

Locking is when the keyboard is unable to send input to the screen. The keyboard might lock when you try to type in a field that does not accept input. The reset key unlocks the screen and allows you to move the cursor to a valid input area on the screen. The reset key often is labeled with the word Reset .

Press F12 or (Fn+F12) rapidly and repeatedly at the Lenovo logo during bootup to open Windows Boot Manager. Select boot device in the list. This is a one-time-option. If the boot device is disabled in the BIOS, then the boot device cannot be selected using this method.

If you have a Lenovo laptop with a built-in battery and it won't power on or wake-up from a sleep state, you can use the pin-hole emergency reset hole (button) to resolve the issue. Disconnect the power adapter and depress this button with a paper-clip or similar item.

For Lenovo All-in-ones, there is no NOVO button. To run Lenovo Onekey Rescue choose one of the options: Repeatedly press and release the F2 key after turning on the computer until entering Lenovo Rescue System, then select OneKey Recovery. System Recovery software in Windows module.

The process to reset the battery is to first unplug the AC adapter, press the reset button using a small pin or paperclip, and then plug the AC adapter back in. After resetting the battery and plugging the machine into power, the laptop should begin to power on and boot.

Unplug the AC, flip the device over, and use a paperclip to gently press the battery reset button through the hole on the back of the chromebook. Hold it down for a few seconds, then release it. This process turns the battery off. It won't turn on again until you've connected the AC power cord and the EC has booted.

Click on Update & Security, then select Recovery to advance to the next step. Choose Restart Now under the Advanced Startup heading to bring up a menu with several options. Select Troubleshoot from the menu, and then click Reset this PC.

How long does the Lenovo reset button last?

Unplug the power cord from the laptop. Use a paper clip and push into the Emergency reset hole, hold for 15 seconds and release it. Attempt to turn the laptop on again.

Press F12 or (Fn+F12) rapidly and repeatedly at the Lenovo logo during bootup to open Windows Boot Manager. Select boot device in the list. This is a one-time-option. If the boot device is disabled in the BIOS, then the boot device cannot be selected using this method.

If your laptop requires an attached battery to boot, simply hold the power button down for 30 seconds. Reconnect the battery, then allow it to charge for one hour without powering on the laptop. After this hour, your battery should be reset – and upon booting your laptop, you should get a more accurate battery reading.

Locate the small hole labelled “REBOOT EMTA” or “Reset” on the back of the DPT (see photos below) Using a pin, depress the button located at the base of this hole for 20 seconds. You will see the lights on the modem begin to flash as the system resets.